Microsoft DOS diskcomp command
Quick links
About diskcomp
Availability
Syntax
Examples
About diskcomp
Compares the contents of a floppy disk in the source drive to the contents of a floppy disk in the target drive.
This command was not included with Microsoft Windows 95, Windows 98, or Windows ME. However, if you upgraded Windows 95 from Windows 3.x, this file would still be available.
Availability
The diskcomp.com command is an external command and is available in the below Microsoft operating systems.
MS-DOS 1.0 to 6.22
Windows 2000
Windows XP
Windows Vista
Windows 7
Syntax
Early versions of MS-DOS Syntax
DISKCOMP Source: Target: /1 /8
| Source: |
Source drive containing one of the floppy disks to be compared. |
| Target: |
Target drive containing the other disk to be compared. |
| /1 |
Compares only the first side of the disks |
| /8 |
Compares the first 8 sectors per track. |
Windows 2000 and Windows XP syntax
Compares the contents of two floppy disks.
DISKCOMP [drive1: [drive2:]]
Examples
DISKCOMP A: B: /1
Compares the first side of A: with B:
Additional information
This command cannot be used with a hard drive and must be only used with floppies that are the identical size.
The diskcomp exit codes are:
0 - Disks are the same.
1 - Disks are different.
2 - Process aborted with CTRL + C by user.
3 - Critical error.
4 - Initialization error. |
